2016 Honda Pilot Oil Type and Capacity: A Comprehensive Guide

When it comes to maintaining your 2016 Honda Pilot, one crucial aspect to consider is the type of oil and its capacity. Using the right oil and adhering to the correct capacity is essential for the smooth functioning and longevity of your vehicle’s engine. In this article, we will delve into the specifics of the 2016 Honda Pilot oil type and capacity, providing you with valuable information to keep your vehicle running optimally.

Understanding the Importance of Choosing the Right Oil

Using the correct oil for your vehicle is crucial as it directly impacts the performance and overall health of your engine. The right oil ensures proper lubrication, reduces friction and prevents wear and tear on vital engine components.

Recommended Oil Type for the 2016 Honda Pilot

For the 2016 Honda Pilot, it is recommended to use synthetic oil with a viscosity grade of 0W20. Honda recommends synthetic oil due to its superior performance and ability to withstand high temperatures.

Factors Influencing the Choice of Oil

Several factors influence the choice of oil for your Honda Pilot. These include the vehicle’s age, driving conditions, climate, and manufacturer recommendations. It is important to consider these factors when selecting the right oil to ensure optimal performance and protection for your engine.

The Importance of Regular Oil Changes

Regular oil changes are vital for maintaining the health of your vehicle’s engine. Over time, oil breaks down and becomes less effective at lubricating the engine, leading to increased friction and potential damage. It is recommended to change the oil in your 2016 Honda Pilot every 5,000 to 7,500 miles or as per the manufacturer’s guidelines.

Determining the Oil Capacity for the 2016 Honda Pilot

To determine the oil capacity for your 2016 Honda Pilot, consult the owner’s manual or the manufacturer’s specifications. In most cases, the 2016 Honda Pilot requires approximately 5.4 quarts without a filter to 5.7 quarts with the filter for a complete oil change.

Step-by-Step Guide for Changing the Oil

  1. Gather the necessary tools and materials: oil filter, oil drain pan, wrench, oil filter wrench, funnel, and the appropriate amount and type of oil.
  2. Position the vehicle on a level surface and ensure the engine is cool.
  3. Locate the oil drain plug underneath the engine and place the oil drain pan underneath it.
  4. Remove the drain plug using a wrench and allow the oil to completely drain into the pan.
  5. Once the oil has drained, replace the drain plug securely.
  6. Locate the oil filter, which is typically located near the oil pan, and use an oil filter wrench to remove it.
  7. Before installing the new oil filter, apply a thin layer of oil to the rubber gasket to ensure a proper seal.
  8. Install the new oil filter and tighten it according to the manufacturer’s instructions.
  9. Using a funnel, pour the recommended amount of oil into the oil filler opening.
  10. Replace the oil filler cap and ensure it is tightened securely.
  11. Start the engine and let it run for a few minutes to allow the oil to circulate.
  12. Check the oil level using the dipstick and add more oil if necessary.
  13. Dispose of the used oil and filter responsibly.

Frequently Asked Questions (FAQs)

  1. Q: Can I use conventional oil instead of synthetic oil in my 2016 Honda Pilot? A: While synthetic oil is recommended for the 2016 Honda Pilot, you can use conventional oil as well. However, synthetic oil offers better performance and protection.
  2. Q: How often should I check the oil level in my Honda Pilot? A: It is recommended to check the oil level at least once a month or before long trips to ensure it is at the appropriate level.
  3. Q: Can I change the oil in my Honda Pilot myself? A: Yes, changing the oil in your Honda Pilot is a relatively simple task that can be done at home with the right tools and instructions.
  4. Q: Is it necessary to change the oil filter with every oil change? A: Yes, it is recommended to change the oil filter with every oil change to ensure optimal filtration and prevent contaminants from circulating in the engine.
  5. Q: What happens if I use the wrong oil type or exceed the oil capacity? A: Using the wrong oil type or exceeding the oil capacity can lead to engine damage and decreased performance. It is important to follow the manufacturer’s recommendations.


Choosing the right oil type and adhering to the correct oil capacity is crucial for maintaining the performance and longevity of your 2016 Honda Pilot’s engine. Synthetic oil with a viscosity grade of 0W-20 is recommended for optimal results. Regular oil changes and proper maintenance are essential for the overall health of your vehicle. By following the guidelines provided in this article, you can ensure that your Honda Pilot performs at its best for years to come.

Leave a Comment